• Is it possible to paint over the MORTEX® coatings?

    As MORTEX® offers a wide range of aesthetic possibilities, it is generally not necessary to add paint.
    In addition to the technical MORTEX® coatings, there are specially developed MORTEX coatings with very fine textures to add the aesthetic touch you desire. See the MORTEX COLOR 2-F1, F2, F3 and F4 coatings.
    If this is the case, the physical properties of the MORTEX® product are similar to those of most stones. You should ask your paint supplier on which surface it can be applied.
    In some cases (BEALWAX product, etc.), it will be highly advisable to remove the protection present on the MORTEX® coating if there is one.
    In all cases, cleaning is necessary to make the surface healthy and clean.
    The MORTEX® coating allows water vapour diffusion (µ=99). This must be taken into account when choosing the type of paint to be applied so as not to disturb water migration and create problems.

    NB: it is also possible to place MORTEX® coating on paint.